Device Overview

1.1 Name and Model

Name: Micro-Electro-Mechanical Hydraulic Servo Split-Type Pressure Testing Machine

Model: DYE-3000S

1.2 Implementation Standards: GB, ISO, ASTM

1.3 Functional Overview: The system employs high‑precision digital servo valves with force closed‑loop control, enabling constant‑rate loading at a specified load rate. It boasts high control accuracy and excellent reliability, fully meeting the testing requirements for materials such as cement and concrete as stipulated in standards like GB, ISO, and ASTM—making it particularly well suited for applications requiring long‑duration operational tests.

System Components: Microelectromechanical Hydraulic Control Box, Pressure Sensor, Digital Servo Valve, Pressure Reducing Valve.

Technical Parameters

Structural Overview

The testing machine consists of three main components: the main body, the hydraulic control box, and the force measuring instrument.

3.1 Body Section

The testing machine frame is composed of four vertical columns that connect the cylinder body to the upper beam, while a lead screw allows for adjustment of the machine’s vertical height. The lower pressure plate is mounted on the piston of the hydraulic cylinder; when the specimen comes into contact with the upper pressure plate, the spherical bearing at the top of the upper pressure plate automatically adjusts to maintain balance, ensuring that the specimen remains perfectly horizontal relative to the upper pressure plate. The lower pressure plate is engraved with positioning lines for the specimen—during testing, the specimen must be aligned precisely with these lines. A dust‑proof housing is installed beneath the lower pressure plate to prevent or minimize dust from entering the cylinder during piston movement, thereby protecting the cylinder body and oil seals from damage. A sealing device is fitted between the piston and the cylinder to prevent oil leakage; however, if a small amount of oil does leak past the piston during operation, an annular oil groove is provided at the top of the cylinder body, along with an oil‑drainage channel that directs the leaked oil back to the main oil tank.

3.2 Hydraulic Control Section

The control box of this testing machine mainly consists of an oil tank, oil pump, oil filter, motor, and a fully automatic digital constant‑load system. The oil pump is a direct‑drive axial five‑plunger pump.

3.3 For details on the system functions, please refer to the pressure testing machine measurement and control software.

Maintenance and upkeep

4.1 The testing machine shall be installed in a clean, dry environment with uniform temperature, free from vibrations and corrosive gas exposure.

4.2 The testing machine shall be kept clean, and parts on the upper surface of the testing machine that are not covered by a protective layer should be regularly oiled to prevent rust.

4.3 Use 46# anti-wear hydraulic oil.

4.4 The piston of the testing machine must not rise more than 30 mm. The control box of the testing machine is equipped with limit‑position calibration; when the arrow reaches the limit, the return oil valve should be immediately and slowly released to allow the piston to descend before restarting the motor for the next test.