Other products

全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册
Search
YTPM-I Flexible Foam Vacuum Water Absorption Tester

YTPM-I Flexible Foam Vacuum Water Absorption Tester

The vacuum saturation test apparatus meets the requirements of GB/T 17794-2021 “Flexible Foam Rubber and Plastic Thermal Insulation Products.” The vacuum extraction requirements specified in the above standard were independently designed and manufactured. It is used in the field of construction material technology, circulating and reusing deaerated water to enhance testing accuracy.
YTPM-II Flexible Foam Vacuum Water Absorption Tester (LCD)

YTPM-II Flexible Foam Vacuum Water Absorption Tester (LCD)

The vacuum saturation test apparatus meets the requirements of GB/T 17794-2021 “Flexible Foam Rubber and Plastic Thermal Insulation Products.” The vacuum requirements specified in the above standard are achieved through a self‑designed and manufactured system, allowing users to independently set the vacuum pressure and hold time, with automatic timing and automatic power-off functions. It features flexible operation, low energy consumption, minimal noise, easy installation, simple operation, and superior safety performance. This equipment is used in the field of construction material technology, enabling the cyclical reuse of deaerated water and enhancing testing accuracy.
YTNF-152 Type Mineral Material Adhesion Brush Washing Machine

YTNF-152 Type Mineral Material Adhesion Brush Washing Machine

Under specified load and brushing cycles, this product can brush the mineral roll specimens being tested to meet standard requirements, preparing them for the determination of mineral material adhesion.
BJ-300 Benzene Board Cutting Machine 500 Type Benzene Board Cutting Machine

BJ-300 Benzene Board Cutting Machine 500 Type Benzene Board Cutting Machine

This machine is an essential tool for cutting various types of polystyrene boards. It is the ideal complementary equipment for laboratories.
TJ-30(15) Type Specific Gravity Frame

TJ-30(15) Type Specific Gravity Frame

Product Load Capacity: Approximately 60 kg Overall Dimensions: 7000 × 520 × 1230 mm
DP-510 On-Site Floor Hardness Tester

DP-510 On-Site Floor Hardness Tester

Product Load Capacity: Approximately 60 kg Overall Dimensions: 7000 × 520 × 1230 mm
JGJ144-A5 Type Exterior Wall External Thermal Insulation Impact Resistance Testing Instrument

JGJ144-A5 Type Exterior Wall External Thermal Insulation Impact Resistance Testing Instrument

This device can be used to conduct laboratory or on-site tests on the impact resistance performance of external wall external thermal insulation systems. It features a simple structure, is easy to use, has adjustable height, employs a magnetic ball‑grabbing mechanism for convenient operation, and is highly mobile, making it well suited for field applications.
LBY-V Type Tensile Testing Machine

LBY-V Type Tensile Testing Machine

Suitable for tensile and bond strength testing of dry-mixed mortar, thermal insulation materials, ceramic wall and floor tile adhesives, multi-layer architectural coatings, and putty for exterior building walls. It is used in factories, construction project quality inspection stations, construction companies, product quality inspection institutes, research institutions and universities, as well as on road and bridge construction sites—covering areas such as production inspection, development, and research.
STT-940 Anti-Corrosion Coating Adhesion Performance Testing Device

STT-940 Anti-Corrosion Coating Adhesion Performance Testing Device

Hammer head material: 45 steel Hammer head weight: 210 ± 10 g Hammer head finish: Chrome-plated surface
Ring Cutter Sampling Device

Ring Cutter Sampling Device

KCJ-1000 Type Bump Marker Impact Tester

KCJ-1000 Type Bump Marker Impact Tester

The raised pavement marker impact tester is specially designed and manufactured for use by manufacturers, quality control agencies, construction contractors, and supervision units to measure the impact resistance of raised pavement markers. It can prevent secondary rebound of the steel ball from causing cracks in the test specimen. The instrument features a reasonable design, simple operation, wide applicability, high measurement accuracy, and excellent safety and reliability.
Scale caliper

Scale caliper

Surface Soil Sampler, 100 mm Inner Diameter

Surface Soil Sampler, 100 mm Inner Diameter

Standard: BS 1377:9 STANDARD: BS 1377:9
Saturated Surface‑Dry Test Mould

Saturated Surface‑Dry Test Mould

Saturated Surface‑Dry Molding Mold: Upper diameter 40 mm ± 3 mm, lower diameter 90 mm ± 3 mm, height 75 mm ± 3 mm Tamping Rod: Diameter 25 mm ± 3 mm, mass 340 g ± 15 g Net Weight: 0.5 kg
Linear shrinkage test mold

Linear shrinkage test mold

Reshaping Tube (40*100) / (39.1*80) mm

Reshaping Tube (40*100) / (39.1*80) mm

GJY-1000 Grouting Vertical Expansion Rate Tester

GJY-1000 Grouting Vertical Expansion Rate Tester

Depth micrometer: Measuring range 25–50 mm Glass plate: Length 100 × Width 100 × Thickness 5 mm Mold: φ75 × 150 mm
Mortar Permeability Mold (70*80*30)

Mortar Permeability Mold (70*80*30)

Soil mixer

Soil mixer

Large copper nail / Small copper nail

Large copper nail / Small copper nail

Large copper nails: 20*35 Small copper nails: 6*18 / 6*25 Post‑embedded measuring nails: 20*20 Concrete drying shrinkage head
Smoothing knife

Smoothing knife

Large copper nails: 20*35 Small copper nails: 6*18 / 6*25 Post‑embedded measuring nails: 20*20 Concrete drying shrinkage head
Wheel Track Test Mold

Wheel Track Test Mold

300*300*50mm; 300*300*80mm; 300*300*100mm
TDJ-II Multifunctional Electric Compaction Tester

TDJ-II Multifunctional Electric Compaction Tester

Compaction Speed: 24–26 strokes per minute, with 8 hammers per revolution and one hammer in the middle. Compaction Cycle Count: Adjustable from 0 to 999 cycles.
Manual demolder

Manual demolder

It is used to extrude specimens with diameters of 4 inches, 6 inches, 100 mm, and 150 mm. Therefore, it can extrude CBR, Marshall, and Proctor specimens. The extruder is driven by a 50 kN hydraulic jack, with a plunger stroke of 160 mm plus a 110 mm screw.
Plunger-Type Cement Paste Consistency Tester

Plunger-Type Cement Paste Consistency Tester

Gypsum Sand Container: Made from cast aluminum in a single piece, with an inner diameter of 80 mm ± 1 mm and an effective internal depth of 70 mm ± 1 mm.
TDJ-III Multifunctional Electric Compaction Tester – Servo Motor

TDJ-III Multifunctional Electric Compaction Tester – Servo Motor

The machine is driven by a servo motor, with the number of compaction strokes per minute and the number of blows per revolution being flexibly adjustable. The control system features a 5-inch touch screen interface.
Cobb Absorbency Tester

Cobb Absorbency Tester

This instrument is designed in accordance with the basic parameters and requirements stipulated in ISO 535: Paper and board — Determination of water absorption (Cobb method) and GB/T 1540–2002: Method for determination of water absorption of paper and board (Cobb method). This standard is applicable to the determination of water absorption on the surface of various types of paper or cardboard; however, it is not suitable for accurately evaluating the writing performance of paper or cardboard.
< 1 >

Request a Quote

Please complete this form, and we will contact you by the next business day.

SUBMIT
%{tishi_zhanwei}%